Engineering Tribology and Materials
Preface, Committee, Sponsors
Table of Contents
Effect of Variation of Gap Thickness of the Thrust Bearing on Gap Pressure and Stiffness of the Aerostatic Spindle in Vertical Milling
Influence of the Spacing of the Partially Porous Aerostatic Journal Bearings and the Rotating Speed on Performance of the Spindle
The Friction Effects for Contact Force Analysis of Three Axes CNC Machine Tool
Lubricated Wear of Machinable Lithium Disilicate Glass Ceramic
Tribological Properties of DLC Coating with Various Zr Target Current

Preparation and Tribological Property of Plasma Sprayed Adaptive Ni-Mo-Al-Ag-BN Composite CoatingThe Effects of Surface Texturing on Friction Performance under Reciprocating Sliding Condition
Optimization on Abrasive Wear Performance of Pultruded Kenaf-Reinforced Polymer Composite Using Taguchi Method
Processing Parameters and Microstructure of 6mm 6061 Aluminum Alloy Joints by Friction Stir Welding
In Situ Observation of Formation Behavior of Adsorption Film in the Narrow Space Using Surface Plasmon Resonance (SPR) Method

Tribological Performance Evaluation of Biodiesel Distilled Residue Blended with Fossil DieselTribology Properties of IGZO Films by the Sliding Contacts of Reciprocating Motion
An In Situ End-Point Detection System Using Motor Power Signal for Chemical Mechanical Planarization Process
Development of Mixing Methods of UHMWPE/Carbon Nanotubes (CNT) Composites for Use in Artificial Joints
Use of Artificial Neural Network (ANN) to Determining Surface Parameters, Friction and Wear during Pin-on-Disc Tribotesting

Study of Unipolar and Bipolar Hip Prostheses Using Finite Element Simulation: Contact Stress AnalysisComparative Study on Nano-Structural and Traditional Al2O3-13TiO2 Air Plasma Sprayed Coatings and their Thermal Shock Performance
On Transient EHL of a Skew Roller Subjected to a Load Impact in Rolling Bearings
Corrosive Resistance of HVOF WC Coatings with a Different Binder
Acoustic Benefits of Ecofriendly Spent Tea Leaves Filled Porous Material
Effects of Friction Models, Geometry and Position of Tool on Curving Tendency of Micro-Extrusion 6063 Aluminum Alloy Pins

Effect of Acid Washing of SiC Particles on Dispersing and Friction Properties of Ni-P-SiC Composite PlatingTribological Properties of Al2O3 Particles Reinforced Ni-P Composite Coating
The Friction Properties of Polyvinyl Alcohol/Graphene Oxide Hydrogels as Cartilage Replacement
Development of a Combined Diamond Impregnated Lapping Plate
Effects of Load, Squeeze Velocity, Viscosity on Pure Squeeze EHL Motion Using Optical Interferometry
Dynamic Characteristics of Rotor-Bearing System with a Labyrinth Seal